Ahlers EDV Systeme GmbH firmiert seit 01.01.2021 als CCS Messgeräte Vertriebs GmbH. Sie können unser Produkte aber weiterhin beziehen.
Ahlers EDV Systeme GmbH has been operating as CCS Messgeräte Vertriebs GmbH since January 1st, 2021. But you can have decided on our products.

Flashrunner I Series

High performance programming engine

FlashRunner I series is composed by single site programmers, targeted for production environments.
FRI series are Universal and Fully Upgradeable programmers, which work either in full standalone mode or controlled by a host system.


  • Fastest programming algorithms;
  • ATE integration;
  • Standalone operations (projects and code images stored on a memory card);
  • Controllable by any host system via RS-232 or Ethernet (right to the model);
  • Supports most ISP protocols (BDM, JTAG, SPI, I2C, MON, ICC, SCI, etc.);
  • Flexible and fully configurable;
  • Compact and robust design for production environments;
  • Data integrity guaranteed;
  • All of the models of the FlashRunner I series have been designed for maximum performance and reliability.

Hardware Features

  • Power supply input 9 to 24V DC (110/220V AC for the FR01PRO model);
  • Five digital I/O lines;
  • Two digital I/O or analog output lines;
  • Twoprogrammable output voltages (0 to 15V, 0.25A and 0 to 5V, 0.5A);
  • One analog input line;
  • One programmable clock output;
  • Secure Digital memory card (up to 2 GB);
  • 512 bytes on-board dynamic memory;
  • On-board timekeeper and calendar;
  • I/O protection;
  • Optoisolated inputs for project selection;
  • Two optoisolated command inputs (START and STOP);
  • Three optoisolated status outputs (FAIL, PASS, BUSY);
  • Optoisolated RS-232 or Ethernet channel.
  • FlashRunner’s open architecture makes its firmware easily upgradeable to support both new devices and new features.

Software Features

FlashRunner comes with a Windows utility that allows you to communicate with the instrument and perform the most common operations: send commands, manage SD card files, update the instrument’s firmware, etc.
ASCII-based commands used to control and setup.

Two ways to receive and execute commands:

  • Over the RS-232 or Ethernet connection (controlled by a host system (e.g. Windows HyperTerminal);
  • Via “scripts” stored in its SD card (Standalone mode).

SD memory card (FAT16).
Unlimitedprojects (scripts).
Log files.


Programming engine (RS-232/LAN)


Programming engine designed to work inside fixture with experiment board


Programming engine designed to work inside fixture